Modularization concept

Since version 12, models in MoBi are built using the modularization concept. It allows users to create, share, and reuse models more efficiently by breaking them down into smaller, manageable components called modules.

This section provides an overview of the modularization concept and is especially suited for users familiar with previous versions of MoBi. It explains the advantages of using modules, how to create and manage them, and the rules that govern module combination.

This page describes the concept as it works in version 13. The overall structure (Modules → Building Blocks → Simulations) is the same as in v12, but several of the rules governing module combination changed. If you are migrating a project from v12, see Converting v12 projects to v13 for a summary of the differences.

An example workflow illustrating how to use the modularization concept in practice can be found in the modularization use case—adding a tumor to a PBPK model.

MoBi project structure

The modularization concept changed how model structures are organized and combined into simulations. While OSP Suite <V12 had two major layers of organization of a MoBi project – Building Blocks (BB) that are combined into Simulations, the modularization concept extends the structure to Modules, Building Blocks, and Simulations.

A MoBi project contains a set of:

PK-Sim modules
- A module created from a PK-Sim PBPK model. As a best practice, a PK-Sim module should not be modified. Instead, all changes/extensions to the model should be done in the so-called Extension modules (see below). A PK-Sim module is converted into an Extension module when edited by the user. A PK-Sim module carries its snapshot, so it can be re-created in PK-Sim.
Extension modules
- Editable modules that contain any changes to the model structure made by the user.
Individuals
Expression Profiles
Simulations, which are combinations of (0-n) PK-Sim modules, (0-n) Extension modules, (0-1) Individual, and (0-n) Expression Profiles. At least one module (PK-Sim or Extension) must be selected to create a simulation.

Every module consists of building blocks, with BB types Spatial Structures (SS) (0-1), Molecules (0-1), Reactions (0-1), Passive Transports (PT) (0-1), Observers (0-1), Events (0-1), Parameter Values (PV) (0-n), and Initial Conditions (IC) (0-n). Every module includes no or exactly one BB of each type, except for PV and IC BBs, of which multiple can be present in one module.

For convenient organization of the project, modules can be grouped in folders in the Modules Explorer.

PK-Sim modules

A project in MoBi can be based on a PBPK model exported from PK-Sim. Such a model will be present as a PK-Sim module in MoBi containing all of the BB types. PK-Sim modules cannot be edited by default. If the user decides to edit a PK-Sim module, the PK-Sim module will be converted to an Extension module. A project can contain multiple or no PK-Sim modules.

Export of a PK-Sim model to MoBi creates one PK-Sim module, one individual, and (0-n) expression profile BBs. The PK-Sim snapshot of the module is stored with the module and allows the PK-Sim module to be recreated.

Extension modules

Each MoBi project may contain any number of Extension modules. An Extension module can add or modify any part of the default PK-Sim model structure - spatial structures, molecules, reactions, etc.

When adding new containers (e.g., adding a new organ) or molecules in an Extension module, it is important to keep in mind that molecules will only be created in containers if entries for the molecule-container combination is present in any IC BB used in the simulation. Therefore, when adding a molecule or a container in an Extension module, the IC BB should be extended accordingly.

Creation of new modules can be performed from scratch ("Create new module" creates a module with empty BBs) or by cloning modules ("Clone module"). Modules can be saved as a *.pkml file, and BBs in a module can be loaded from *.pkml files.

Location of (individual) parameters

Since v12, individual parameters are stored as follows when a PBPK model is imported in MoBi (this is unchanged in v13):

All parameters of the spatial structure that are present in all species and have the same value or the same formula in all species and individuals are stored directly in the spatial structures BB with the fixed value or an explicit formula. Example: Organism|Thickness (endothelium) (constant value) or Organism|Weight of blood organs (sum formula).
Parameters that are present only for certain species (e.g., Organism|Lumen|Duodenum|Thickness_p1 is only present in the human species, but not in rat, Organism|Lumen|Duodenum|Default thickness of gut wall is present in the rat but not in human), or have different species-specific values (Organism|Acidic phospholipids (blood cells) [mg/g] - RR) or vary within a population (e.g., Organism|Fat|Volume) are not located in the spatial structures BB, but only in the individual. Such parameters are added to the simulation structure during the simulation creation step.

For convenience, parameters that are defined in the individuals can be shown in the spatial structure editor by selecting an individual in the "Show parameters from individual" box.

The parameters that are defined in the individual are shown with grey background and cannot be edited in the spatial structure editor. You will notice that some parameters have a NaN value. These parameters are defined by an equation that cannot be evaluated at this time, e.g., because they depend on other parameters that are also defined in the individual. The values of these parameters will be calculated after the simulation creation.

Parameter values building block

The PV BB should only contain values for parameters that are different from those stored in other BBs. In most cases, the PV BB will be empty when a PK-Sim model is imported into MoBi. An exception is when the user has modified parameter values in the PK-Sim simulation that are not part of any PK-Sim BB (e.g., intestinal permeability of Midazolam in the Midazolam PBPK model.) These "Simulation parameters" are transferred in the PV BB.

Creating simulations from modules and combination rules

Multiple modules can be combined to create a simulation. For simplicity, a specific combination of modules is called model configuration. When creating a simulation from modules, the Extension modules will extend or overwrite the previous modules. The user can select multiple PK-Sim modules, or PK-Sim modules in combination with Extension modules, or only the Extension module(s). The selection of the modules results in a hierarchy of the modules, where the order of module selection determines the order of overwrite/extend actions. I.e., multiple PK-Sim modules are always extended to a common PK-Sim module, the selected Extension module 1 extends/overwrites the common PK-Sim module, the selected Extension module 2 overwrites/extends the combination of the common PK-Sim module and the Extension module 1, and so on.

If a model configuration contains a PK-Sim module, the user must select an Individual and might include Expression Profiles. For each module that contains at least one IC or PV BB, the user can select one (or none) IC and/or PV BB.

During simulation creation, the modules are combined to a common model structure. Entities are combined (extended or overwritten) by their absolute path (for containers in the spatial structure, parameters, and molecule values) or by their names (for neighborhoods, passive transports, molecules, etc). The result is a simulation which represents the combination of the selected modules.

There are two types of combination behavior that can be defined for a module - overwrite or extend. The following sections describe how different building blocks are merged and what are the differences between the overwrite and the extend modes, if any.

The merge rules described below are the v13 rules. Several of them differ from v12: in v12, "Extend" behaved like a full overwrite for Molecules, Reactions, Passive Transports, and Observers; MoleculeProperties in the spatial structure were always merged regardless of the merge behavior; and equally-named events were not merged across modules before simulation creation. A model configuration created in v12 can therefore produce a different simulation in v13. See Converting v12 projects to v13 for a complete list of the differences and the migration steps.

Condition lists

Observers, passive transports, events, and reactions use condition lists - the lists titled "In container with" or "Between containers with" - to define where in the model structure they are created (see How Tags are used). Wherever the sections below state that such a list is extended, the following rules apply:

All conditions defined in module B are added to the conditions defined in module A. Conditions are never removed. A condition defined in both modules is added twice, which does not change the result of the evaluation.
A condition group is treated as a single condition of the list. It is added as a whole, keeping the conditions and the operator (AND/OR) defined within the group. Condition groups of different modules are never combined with each other, and the operator within a group is never changed.
The operator (AND/OR) of the condition list itself is always taken from module B, even if module B defines only a single condition.

Under the merge behavior "Overwrite", the complete condition list, including its operator, is taken from module B.

Because the operator of the condition list is always taken from the module lower in the hierarchy, an extension module can change the meaning of the conditions defined in a module higher in the hierarchy. Example: module A defines the condition list (Condition group 1) OR (Condition group 2), and module B adds a single condition to the same list using the AND operator. The resulting condition list is (Condition group 1) AND (Condition group 2) AND (condition from module B), so an entity that was created in the containers matching either group is now only created in the containers matching both of them.

Note that AND is the default operator, and that the operator of a list with only one condition is not visible in the user interface. Always verify the resulting model structure in the created simulation.

Spatial structure

Merge behavior "Extend"

When combining modules A and B (with the hierarchy A <- B), all containers and parameters from module B will be added to module A. I.e., if module A has a container Organism|Container 1 with two sub-containers Container 2 and Container 3 (absolute paths: Organism|Container 1|Container 2 and Organism|Container 1|Container 3), and module B has a container Organism|Container 1 without any sub-containers, the final model will contain Organism|Container 1 with parameters defined in both modules, and with the sub-containers Organism|Container 1|Container 2 and Organism|Container 1|Container 3.

MoleculeProperties are extended. That means that new molecule properties from module B will be added to the existing ones in module A. If module B has a molecule property that is also present in module A, the property (its constant value or formula) from module B will be used.
Parameters are always overwritten. If both modules have a parameter Organism|Container 1|Param, the parameter from module B will be used. This applies to all properties of the parameter (value, formula, unit, tags etc).
Container types (physical or logical) will be overwritten. If "Organism|Container 1" is "physical" in module "A" and "logical" in module "B", the container will be "logical" in the final model.
Tags of containers and neighborhoods will be extended. If "Organism|Container 1" has a tag "Tag A" in module "A" and a tag "Tag B" in module "B", in the final model, "Organism|Container 1" will have tags "Tag A" and "Tag B". A tag defined in module A can never be removed by module B. The tags of a parameter are not extended: as stated above, a parameter is replaced as a whole, so it only has the tags defined in module B.
Neighborhoods are extended (e.g., addition of new parameters, tags). Neighbors are replaced. If module A defines a neighborhood N1 between Organism|Container 1 and Organism|Container 2, and module B defines a neighborhood N1 between Organism|Container 2 and Organism|Container 3, the final model will contain a neighborhood N1 between Organism|Container 2 and Organism|Container 3.

If module B defines the neighborhood N1 with a neighbor that cannot be found in the final model structure, the simulation creation fails with an error. To remove a neighborhood defined in a previous module, redefine it without neighbors: the neighborhood is then removed from the simulation, and a warning is shown during simulation creation. The removal works in both merge behaviors.

Redefining a parameter in module B removes the tags that this parameter has in module A, even if the only intention was to change its value. Parameter tags are used to select parameters in sum formulas, so a sum formula defined in module A will silently stop taking such a parameter into account. To avoid this, repeat all tags of the parameter in module B. Conditions that use the name of the parameter or the tags of its container are not affected, as the name of an entity also acts as a tag.

Merge behavior "Overwrite"

When combining modules A and B (with the hierarchy A <- B), all containers from module B will overwrite the containers with the same path in module A. When overwriting, all descendants of a container are removed if not present in the module that overwrites (i.e., replacement of the whole tree structure). I.e., if module A has a container Organism|Container 1 with two sub-containers Container 2 and Container 3 (absolute paths: Organism|Container 1|Container 2 and Organism|Container 1|Container 2), and module B has a container Organism|Container 1 without any sub-containers, the final model will contain Organism|Container 1 without the sub-containers Container 2 and Container 3. Organism|Container 1 will only have parameters that are defined in module B, but not in module A.

MoleculeProperties are overwritten, like any other container. The MoleculeProperties container of module B replaces the one accumulated from the previous modules, so only the molecule properties defined in module B are created. This applies to the MoleculeProperties container at the top level of the spatial structure (next to Neighborhoods) and to a top-level MoleculeProperties container inserted through a Parent path. A MoleculeProperties container located inside another container is replaced together with that container, as described above.
Parameters will be overwritten by their absolute path. If both modules have a parameter Organism|Container 1|Param, the parameter from module B will be used.
Container types (physical or logical) will be overwritten. If "Organism|Container 1" is "physical" in module "A" and "logical" in module "B", the container will be "logical" in the final model.
Container (including neighborhoods) Tags will be overwritten. If Organism|Container 1 has a tag "Tag A" in module A and a tag "Tag B" in module B, in the final model, Organism|Container 1 will only have tag "Tag B".
Formulas are never overwritten (also not in the "overwrite" mode). Meaning, if module B defines a formula with the same name as a formula in module A, the updated formula will only be used for the parameters defined in module B, but not for other parameters that use this formula.
Neighborhoods will be overwritten by their names. Their parameters, tags, and neighbors will be overwritten.

Because the MoleculeProperties container is replaced as a whole, an empty MoleculeProperties container in module B removes all molecule properties contributed by the previous modules.

MoBi® never creates such a container on its own - neither at the top level of a new Spatial Structure building block nor in a newly created container - so it is only present where it was added deliberately. If a module set to "Overwrite" carries a MoleculeProperties container that is not meant to replace anything, delete the container (see MoleculeProperties) or set the module to "Extend".

Molecules

The list of available molecules is always extended. If module A has molecule MolA and module B has molecule MolB, the final model will contain both MolA and MolB, disregarding the merge behavior.

Merge behavior "Extend"

Molecule type (Drug, Enzyme, Transporter, etc.) is always overwritten. If module A defined molecule MolA as Drug, and module B defined molecule MolA as Enzyme, the molecule MolA will be of type Enzyme in the final model.
Stationary: the property is always overwritten.
Calculation methods: The defaults are always overwritten. Be aware that calculation methods only apply to non-stationary molecules.
Parameters are extended. If both modules have a parameter MolA|Param, the parameter from module B will be used. This applies to all properties of the parameter (value, formula, unit, tags etc). New parameters can be added.
Parameter type (local/global) is always overwritten.
Active Transports are extended. Transporter molecules and active transport processes that are not defined in module A are added. For an active transport process defined in both modules, the same rules apply as for a passive transport:
- The parameters list is extended - new parameters are added, and a parameter defined in both modules is taken from module B.
- The equation in the Kinetic tab is overwritten.
- The source and target lists are extended; their operators are overwritten.
- The "Create process rate parameter" and "Plot process rate parameter" properties are overwritten.
- The transport name of the transporter molecule is overwritten.

Merge behavior "Overwrite"

Molecule type (Drug, Enzyme, Transporter, etc.) is always overwritten. If module A defined molecule MolA as Drug, and module B defined molecule MolA as Enzyme, the molecule MolA will be of type Enzyme in the final model.
Stationary: the property is always overwritten.
Calculation methods: The defaults are always overwritten. Be aware that calculation methods only apply to non-stationary molecules.
Parameters are overwritten. Only parameters existent in the last module will be present in the simulation. New parameters cannot be added.
Parameter type (local/global) is always overwritten.
Active Transports: The molecule is completely overwritten. This implies that only active transports defined in the latest module will be present in the simulation.

Reactions

Merge behavior "Extend"

Educts, Products, and Modifiers are extended. New educts/products/modifiers can be added, but existing cannot be removed. A workaround to exclude an educt or a product of being affected by the reaction is to set its stoichiometry to 0.
Stoichiometry values are overwritten.
Equation in the Properties tab is overwritten.
Parameters list is extended. That means that new parameters are added, but existing parameters are overwritten.
Container criteria are extended, the Operator is overwritten.
Create process rate parameter property is overwritten.
Plot process rate parameter property is overwritten.

Merge behavior "Overwrite"

Reactions are completely overwritten by name.

Passive transports

Merge behavior "Extend"

The equation in the Kinetic tab is overwritten.
The Parameters list is extended.
The Operator (and/or) for the "Source" and "Target" lists are overwritten.
Source and Target lists are extended.
Include/Exclude molecule lists are extended: the molecules listed in module B are added to the respective list and removed from the other one. The state of the All checkbox is overwritten by module B.
- Only one of the two lists is evaluated when the simulation is created (see Passive Transports): if the All checkbox is checked, the transport is created for all molecules except those in the Exclude List, and the Include List is ignored; if it is not checked, the transport is created only for the molecules in the Include List, and the Exclude List is ignored.
- Example: Module A has the All checkbox unchecked and MolA and MolB in its Include List. Module B has All checked and MolB in its Exclude List. In the final model, the checkbox is checked and the Exclude List contains MolB, so the transport is created for all molecules except MolB - not only for MolA, and also for molecules that neither of the two modules mentions.

Merge behavior "Overwrite"

Passive transports are completely overwritten by name.

Observers

Merge behavior "Extend"

The equation in the Monitoring tab is overwritten. The Dimension of the observer is overwritten as well, together with its Description and Icon.
The Operator of the "In container with" list is overwritten.
The Conditions list of the "In container with" list is extended.
Include/Exclude molecule lists are extended: the molecules listed in module B are added to the respective list and removed from the other one. The state of the All checkbox is overwritten by module B.
- Only one of the two lists is evaluated when the simulation is created (see Observers): if the All checkbox is checked, the observer is created for all molecules except those in the Exclude List, and the Include List is ignored; if it is not checked, the observer is created only for the molecules in the Include List, and the Exclude List is ignored.
- Example: Module A has the All checkbox unchecked and MolA and MolB in its Include List. Module B has All checked and MolB in its Exclude List. In the final model, the checkbox is checked and the Exclude List contains MolB, so the observer is created for all molecules except MolB - not only for MolA, and also for molecules that neither of the two modules mentions.

Merge behavior "Overwrite"

Observers are completely overwritten by name.

Events

Events are combined by name: when multiple modules define an event with the same name, these definitions are merged into a single event definition before the simulation is created, following the rules below. The merged event is then created in every container that matches the resulting container criteria.

Merge behavior "Extend"

The tree structure of the event is extended. This means:

Container criteria from both modules are combined, while the Operator (and/or) is overwritten by the module that is lower in the hierarchy.
Parameters list is extended. If the same parameter is defined in multiple modules, the parameter from the module that is lower in the hierarchy is used.
Administered molecule is overwritten.

For each event:

Event start condition equation is overwritten.
Event start condition - "One Time" checkbox is overwritten.
The list of Assignments is extended.
New nodes (events, containers, etc.) are added.

For each transport in an event (see Transport), the same rules apply as for a passive transport:

The formula in the "Kinetic" tab is overwritten.
Source and target lists are extended; their operators are overwritten.
The "Create process rate parameter" and "Plot process rate parameter" checkboxes are overwritten.
The parameters list is extended. If the same parameter is defined in multiple modules, the parameter from the module that is lower in the hierarchy is used.

Merge behavior "Overwrite"

The event definition from the module that is lower in the hierarchy completely replaces the definition from the higher modules.

Container criteria list is overwritten.
Parameters list is overwritten. Only parameters defined in the module that is lower in the hierarchy are used.
Administered molecule is overwritten.
All subnodes of the event (e.g., ProtocolSchemaItem, Application_StartEvent) are overwritten.

For each event:

Event start condition equation is overwritten.
Event start condition - "One Time" checkbox is overwritten.
The list of Assignments is overwritten.

Parameter values

The final values or formulas of the parameters in a simulation are determined in the following order. The values are applied in this sequence, so a value applied later overwrites a value applied before it:

Values defined in the building block: first, the value defined in the BB where the parameter is defined. For example, the value of CYP3A4|Reference concentration is set to 1 µmol/l in the Molecules BB. If a simulation is created using only this Molecules BB and no Expression Profile or PV BB is selected, the value will be 1 µmol/l.
Values defined in an Expression Profile. If an expression profile is selected, the values from the expression profile are applied. For example, CYP3A4|Reference concentration is set to 1 µmol/l in the Molecules BB, and 4.32 µmol/l in the Expression Profile. If a simulation is created with the module with the Molecules BB and the Expression Profile, the value will be 4.32 µmol/l (overriding the value from the Molecules BB).
Values defined in the individual. If an individual is selected, the values from the individual are applied. When applying an individual to a PK-Sim module only, the parameters defined in the individual are not present in the spatial structure of the PK-Sim module. These parameters are added to the model when the simulation is created.
The individual is applied after the expression profiles. If a parameter is defined in both, the value from the individual is used. This is required for aging simulations, where the individual defines a parameter such as the ontogeny factor of a protein as a time-dependent table formula, while the expression profile defines it as a constant value.
One special case occurs when an extension module explicitly defines a parameter in the spatial structure that is also present in the individual. In this case, the value from the individual will overwrite the value (or formula) defined in the extension module. To overwrite parameters defined in an individual (e.g. defining the volume of an organ as an age-dependent table rather than a constant value), define this parameter in the 'Parameter Values' section of an extension module.
Values defined in PV BBs. If a module containing a PV BB is selected, the values from the PV BB are applied. If multiple modules contain PV BBs with entries for the same parameters, the value from the latest module is selected. For example, if the Extension module contains an entry for CYP3A4 Reference concentrationwith a value of 2 µmol/l and a simulation is created using the Molecules BB module with a value of 1 µmol/l, the Expression Profile module with a value of 4.32 µmol/l and the PV BB module with a value of 2 µmol/l, the value in the simulation will be 2 µmol/l.

Initial conditions

The final start values or formulas for molecules in a simulation are determined in the following order:

Values defined in the Molecules BB. Start values as defined in the Molecules BB.
Values defined in the Expression Profiles. For proteins, values (including the formulas for start values) that are defined in the Expression Profile of the protein.
Values defined in the IC BBs. If multiple modules have IC BBs with entries for the same molecules, the value from the latest module is selected. If an IC BB have entries for the same molecule/container combination as an Expression Profile, the values from the IC BB will be applied.

Commit/update changes

This section describes the workflow of committing changes from a simulation to a building block and updating a simulation with changes from a building block.

Updating a simulation with changes from a building block

If a building block used in a simulation is changed after the creation of the simulation, the simulation will automatically be marked as "outdated". To update the simulation with the changes from the building block, simply right-click on the simulation and select "Update from Building Blocks". This will invoke re-creating the simulation from the building blocks, applying any changes made to all building blocks since the simulation was created. Any changes to parameter or start values made in the simulation will be lost!

It is no longer possible to update only selected building blocks.

Committing changes from a simulation to a building block

Changes to parameter values or initial conditions made in a simulation can be committed to the building block (BB) the parameter/start value belongs to. To do so, right-click on the simulation and select "Commit to building blocks".

A dialog opens where the target of the commit is selected:

Module - the module that receives the changes. One module is selected for all changed building block types, so committed changes always stay together in the same module.
Parameter values building block and Initial conditions building block - the Parameter Values (PV) or Initial Conditions (IC) building block of the selected module that receives the changes, or "New Parameter Values Building Block"/"New Initial Conditions Building Block" to create one. A selection is only offered for the building block types that actually have changes.

By default, the dialog offers the last module of the simulation configuration and the building blocks the simulation currently uses.

When committing changes made to a simulation created from PK-Sim module(s) only, the selected PK-Sim module will be converted to an extension module. To avoid this, create a new extension module that should contain the changes. Then create the simulation with the extension module.

The simulation stays in sync with its building blocks only if the changes are committed to the building blocks the simulation actually uses, or to newly created ones if the selected module has none. Committing to any other building block writes the values to that building block alone - the simulation is not updated and remains marked as out of sync. MoBi® warns about this in two cases:

The selected building block is not used by the simulation. Configure the simulation to use that building block to make it reproduce the committed values.
The committed values are shadowed by a building block selected in a later module of the simulation configuration. The values of the later module win when the simulation is created, so a simulation re-created from the current configuration would not reproduce the committed values.

Structural changes made to building blocks (e.g., adding/removing reactions, molecules, compartments, etc.) cannot be reverted by committing an "outdated" version of the building blocks from a simulation. Only changes to parameter values and initial conditions can be committed.

Best practices

The OSP software is best suited for the development of complex quantitative systems pharmacology/toxicology (QSP/T) models based on the physiologically-based kinetics (PBK) modeling framework. With the introduction of the modularization concept, development of such models is even more efficient, transparent, and sustainable. To get the most out of the new concept, the following best practices should be considered.

Consider having a separate PK-Sim module for each compound, if the compounds are not interacting with each other. This allows flexible combination of modeled compounds in MoBi simulations.
For drug-drug interaction (DDI) models, however, the compounds should be included in the same PK-Sim module, and the interactions should be defined in PK-Sim.

Combining two PK-Sim modules does not automatically create interactions between the compounds in the two modules, even if one of the compounds is a perpetrator of a DDI. The interactions must be defined in PK-Sim, and the compounds must be included in the same PK-Sim module.

PK-Sim modules should never be modified. Any modification and/or extensions should be implemented as separate modules.
An extension module should be defined as generic as possible. I.e., it should be compatible with any PK-Sim module with minimal adjustments, if possible.
Avoid duplication of information across modules - only implement the differences to other modules!
It is possible to combine PBPK models with different model structures (i.e., combine a model for small molecules with a model for large molecules). In this case, it is important that the models for small molecules are selected before the models for large molecules. Otherwise, simulation creation will fail due to missing parameters.

Project conversion

To get the full advantage of the new modularization concept with the support of individuals and expression profiles in MoBi, you will require a PBPK model created with PK-Sim V12. For PK-Sim project created with previous version, the project must be re-created from a snapshot. Open your project in PK-Sim V12, export it to snapshot, and then re-load from snapshot (see documentation). After this, all simulations in the project will have the new structure and sending them to MoBi will properly transfer the individuals and expression profiles.

When loading a simulation from a *.pkml file, one module will be created containing the entire model.
When opening a MoBi project created with previous versions:
- If the project contains exactly one building block (BB) of each type (i.e., spatial structure BB, one reactions BB, one molecules BB, etc.), a single module will be created containing all the building blocks.
- If the project contains multiple building blocks of the same type, a module will be created for each building block.

Due to the new structure of simulation configuration, changes in parameter values or initial conditions made in the simulations created with previous versions of MoBi cannot be committed to building blocks. When opening a project created with previous versions of MoBi, the simulations will be marked as "outdated", and a warning will be shown.

PreviousThe Building Block Concept

NextSpatial Structures

Last updated 3 days ago